AWR1642BOOST-ODS: tsw1400evm AND RADAR studio

Sherry Gomez

We have recently purchased TSW1400 and AWR1642BOOST-ODS. However we are understand how to mate the two pcbs. I have installed all the recommended software and dfps but nothing seems to respond to AWR1642BOOST-ODS while connecting through USB. Please advice.

Regards

Sherry

over 2 years ago

0 Ishita Kochar over 2 years ago

TI__Mastermind 31680 points

Hello Sherry,

Can you let us know where exactly you have reached in the chain?

For starters, are you able to see the required number of COM ports in the Device manager after connecting to the two devices to your PC?

We do have a training video and FAQ page to help users get started on the data capture using TSW1400 and the AWR device. Please refer to the links below :

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/856054/faq-raw-adc-data-capture-from-mmwave-sensor

https://training.ti.com/mmwave-sensor-raw-data-capture-using-tsw1400-board

Regards,

Ishita

Sensors

Sensors forum

AWR1642BOOST-ODS: tsw1400evm AND RADAR studio