This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1843BOOST: AWR1843BOOST Antenna Design

Part Number: AWR1843BOOST

Hi, we are trying to replicate Antenna Design  from AWR1843BOOST, there is cut on the AWR1843BOOST board marked in yellow box in the picture, what is the significance of this cut? is it required to have this cut on my design.

  • Hello Rajesh,

    The section you have marked are just test coupons to measure the trace impedances. These are not required for the antenna or any functionality. We use it to measure the PCB impedance control quality.

    Regards,
    Vivek