If the application only need 1 % accuracy, is there any any difference using TMP112A and TMP112N?
Thanks and best regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
If they are operating at 3.3V and assuming your limit is either +/- 1ºC, or 1% of Full-Scale (from -40ºC, to 125ºC). I would say no, there is no difference if they don't care about the additional accuracy provided by the A version in that narrower temperature range (0 ºC, to 65 ºC).