Other Parts Discussed in Thread: OPT3006
Hi team,
Do you have 3D or 2D CAD file of OPT3007? We need to create NPTH hole for sense window in layout.
Thanks.
Regards,
Allen
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Allen,
Due to July 4th holidays in US, our response is delayed.
The device champion will get back to you this week.
Hi Allen,
Who is the customer here?
3D file is here: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1014054/opt3006-3d-cad-file?tisearch=e2e-sitesearch&keymatch=opt3007%252520cad#
For 2D you can find this under package on the device page.
However, for determining hole size please refer to the FoV estimator tool on the OPT3006 page (also works for OPT3007). FoV needs to be clearly understood and the impact on performance so this tool will help much more than the models. You would want to aim for 40 degrees half angle or greater for best performance.
Best,
Alex