• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 109 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPT3007: Detail integration (Sampling) timing

Rocky Chen
Expert 6795 points
Part Number: OPT3007

Hi Expert

Could you help provide a detail timing? That being said, detail timing after receiving I2C command (single-shot), ADC sampling and ADC conversion....

Based on the timing, we want to evaluate if 3007 could be used in display panel, to sensing the light during the each frame blanking time.

Thanks!

-Rocky

  • 0
    TI__Mastermind 25815 points

    Hi Rocky,

    All conversion time details are in the datasheet. Please see Total integration time in spec table and associated footnote #5 for these details. As device minimum time is 100ms and usually display blanking is longer it is unlikely this would work. What is the display blanking time needed?

    Best,

    Alex