• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 148 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HDC2010: When they read registers from 0x00 - 0x03

Noriyuki Takahashi
Genius 9245 points
Part Number: HDC2010

Hi team,

When they read  registers from 0x00 - 0x03, I think they need to set the slave address and also 0x00 as the pointer like Figure 3-1 and Figure 3-2 of the link as below. However, it seems that Figure 3-3 doesn't set 0x00 as the pointer. Is this correct?

https://www.tij.co.jp/jp/lit/ug/snau250/snau250.pdf?ts=1630456094543&ref_url=https%253A%252F%252Fwww.tij.co.jp%252Fproduct%252Fjp%252FHDC2080

Regards,

Noriyuki Takahashi