• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 64 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843ISK-ODS: TargetIdx error

Abdullahi Oyero
Prodigy 210 points
Part Number: IWR6843ISK-ODS

hello,

when ever I launch the sensor, 

my TargetIdx changes between the actually value and 254-255  which indicates point not associated, located outside boundary of interest and considered as noise

as seen in the Image below

please what can I do

Regards Abdullahi

  • 0
    TI__Expert 7510 points

    Hello,

    Please refer to the following piece of documentation with regards to how the CLI Commands associated with GTrack mean and how to tune the algorithm for your use case.

    3D People Counting Tracker Layer Tuning Guide
    <MMWAVE_INDUSTRIAL_TOOLBOX_INSTALL_PATH>\labs\people_counting\docs\3D_people_counting_tracker_layer_tuning_guide.pdf

    Best regards,

    Connor Desmond