AWR6443: Uniflash error! image load fail when flashing the 6443 BIN to 6443 silicon

Hello

Can you please confirm the source of the xWR6443 image?

Is it from SDK's OOB demo?

Thank you,

Vaibhav

Hi Vaibhav,

I had confirm this SDK 6443 BIN can be flashed to my 6843 EVM board when select the 6443 device in uniflash GUI,

But it cannot be flashed to customized 6843 board when selecting the 6443 device in uniflash GUI.

Thanks.

Wesley

Wesley,

Do we have any way to rule out hardware issues on the customer's custom hardware?

Best Regards,
Alec

Hi Alec,

It's not a HW issue. HW is connect to 6443 customized board.

Uniflash select IWR6843, and use IWR6443 BIN, then it works, flash succeed, and succeed runs.

Uniflash select IWR6443, and use IWR6443 BIN, then it failed. Uniflash error! image load fail 

Please let me know if you have any comments.

Thanks.

Wesley

Wesley,

So to confirm, the issue is not seen, on the same hardware, if IWR6843 is selected instead of IWR6443? 

Best Regards,
Alec

Yes.

Wesley,

Understood. I can look into this and get it resolved in upcoming versions, is this blocking in any way, or can it continue to be flashed as a 6843 for the time being?

Best Regards,
Alec