This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1843AOP: Beam forming scan time <60mS

Part Number: AWR1843AOP

I have found from the beam steering demo document (attached screenshot below), default frame duration as 60 mS, I understood this as dwell time of the beam in specific angle fed by user


Can I alter this timing ?

How much lower can I go ?

will 2mS work ?

What is the impact if i lower it to 2mS ?


Prince. A