BOOSTXL-TUSS4470: "Hardware Disconnected"

Omer Faruk Basaran

Part Number: BOOSTXL-TUSS4470

I was using the EVM GUI for 2 weeks.There was no problem with it. After that I tried some c code in Code Composer Studio. Now I'm back to using the gui again but I can not connect the hardware.

So I have the same issue that posted before but I tried the following solution but it didn't fix.

6 months ago

0 Jacob Nogaj 6 months ago

TI__Expert 4496 points

Hello,

It sounds like the firmware on the MSP430 device was altered, hence why the device is not being recognized by the EVM GUI.

Were you able to attempt re-flashing the TUSS44x0 EVM batch (.bat) firmware onto the EVM?

Section 3.2 of the TUSS44x0 Users Guide details the flashing process for the firmware.

Please let me know if this helps resolve your issue.

Regards,

Jacob

0 Omer Faruk Basaran 6 months ago in reply to Jacob Nogaj

Prodigy 50 points

thank you but my problem was different and i noticed that i made some wrong wire connection on my device after that i fixed it and now there is no problem, everything working now.

Thank you for your kind interest,

Omer

0 Jacob Nogaj 6 months ago in reply to Omer Faruk Basaran

TI__Expert 4496 points

Great to hear you were able to diagnose the issue.

Feel free to open another E2E thread for any additional questions.

Regards,

Jacob

Sensors

Sensors forum

BOOSTXL-TUSS4470: "Hardware Disconnected"