1>What is the use of general call reset command
2>What will be the usage of general call reset command in TMP112
3>How to program General call reset command
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear Yuktheshwar -
1. The use of the general call reset is to reset all the devices on an I2C bus that support this command.
2. The usage with the TMP112 is reset the part.
3. As mentioned in the datasheet (you found the section in the datasheet) the I2C command would be formed as: 0x00 0x06 (or 0000 0000 0000 0110)
Here is related excerpt from the I2C spec.