• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 215 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

FDC2112-Q1: Vehicle capacitive touch sensor inquiry

FDC2112-Q1: Configuration

Lauren Mayfield
Expert 7505 points
Part Number: FDC2112-Q1

Hi team,

My customer would like to know can they use the register configuration from the development board for this part if they are using a 12 bit chip (the dev board has a 28 bit chip)? Is there anything they should change regarding the configuration guide to make it adaptable to a 12 bit chip?

Thanks!
Lauren

  • +1
    TI__Mastermind 36285 points

    Lauren,

    Thank you for your post and your interest in TI products.
    The main difference is the DATA registers, the maximum sample rate, and of course whether it is a 2-channel or a 4-channel part.
    Depending on their application, the different sample rates may impact other settings, like RCOUNT, etc.
    Estimating the sensor frequency is also different when comparing 12b and 28b parts, and the details are shown in equations (7)-(9) in the data sheet.

    Regards,
    John