• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 31 subscribers
  • Views 164 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1843AOP: Data Structure

May
Genius 9880 points
Part Number: AWR1843AOP

Hi, 

Customer want to have the structure of the frame at the output of the awr1843aop sensor (data format/Data Structure : (header , TLV ...), How the frame is divided ). Do we have the document that we can provide?

Thank you in advance.

Regards,
May

  • 0
    TI__Guru*** 138339 points

    Hi,

    First it is important to understand that this structure is defined by the SW running on the target and is different for each SW demo.

    I assume the customer is using the mmWave SDK 3.5 demo

    The documentation of the data format sent from the sensor to the PC through UART is provided in

    Millimeter Wave (mmw) Demo for XWR18XX

    See Section "Output information sent to host"

    Thank you

    Cesar

  • 0 in reply to Cesar
    TI__Genius 9880 points

    Hi Cesar,

    Just received response from customer, please see details below.

    yes i am using sdk 3.5 on my device
    but I did not find the document which describes the data format
    if possible send me a link or the pdf file.

    Thank you.

    Regards,
    May

  • 0 in reply to May
    TI__Guru*** 138339 points

    Here it is

    mmWave SDK Module Documentation

    Thank you

    Cesar