This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM60: Schematics design review

Part Number: LM60

Hi,

Could you please review the attached schematics and let me know your comments.

Regards

Nikhitha antony

  • Hi Nikhitha,

    Thank you for your question.

    Please ensure that the capacitors chosen have double the voltage rating than the power supply that will be used.

    Additionally, place the 1uF capacitor exiting Vo that forms the low-pass filter as close as possible to the ADC. Also try to place the 0.1uF capacitor entering +Vs as close to the LM60 as possible to protect against excessive noise going into the temp sensor.

    Best regards,

    Sydney