The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR2243: How to collect RAW12 data with AWR2243

Part Number: AWR2243

Dear TI Supporter,

Now I want to collect some data on AWR2243 with RAW12 format and 12 bit size. By reading the "mmWave Radar Interface Control Document", I notice that I need to set AWR_ADCOUT_CONF_SET_SB => NUM_ADC_BITS = 0 and AWR_DEV_RX_DATA_FORMAT_CONF_SET_SB => NUM_ADC_BITS = 0. However, the raw data I collected still have a 16bit size in each cell. What other parameters should I set for my purpose?

Thank you and best regards,