This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMP461-SP: Cold Sparing Information

Part Number: TMP461-SP
Other Parts Discussed in Thread: TMP461,

Hello,

Are there any cold sparing requirements on TMP461, particularly with the two-wire I2C serial interface? An FPGA is driving the SDA and SCL lines with the temp sensor as the slave device, and I was considering any damage conditions for when the signal is applied prior to device power-up. any info is much appreciated.