LDC1101EVM: Issues getting the EVM GUI working.

Christian Shimp

Part Number: LDC1101EVM

Hello,

I am having issues trying to get the EVM GUI working. I tried installing the setup.exe as an admin and running the EVM GUI in Windows 7 compatibility mode.

I am using a computer that is running Windows 11. I am stuck that this screen, the only interface option that works is the COM Port pull-down menu.

Thank you.

When I run the EVM GUI as an admin I get the error below. I have installed the NI-visa runtime via the NI manager.

over 1 year ago

0 Justin Beigel over 1 year ago

TI__Genius 17660 points

Hello,

Try installing the http://2541.fix_ldc1101_gui_com_port_issue.zip/ patch from this E2E thread: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/686041/ldc1101-ldc1101-evm-gui-issue-with-windows-10.

Best Regards,

Justin Beigel

0 Christian Shimp over 1 year ago in reply to Justin Beigel

Prodigy 10 points

I am still getting the same error. I installed the msi file you linked and reinstalled the EVM GUI.

+1 Justin Beigel over 1 year ago in reply to Christian Shimp

TI__Genius 17660 points

Hello,

Sorry you are still having an issue. You may not have an older version of the Microsoft .NET framework on your computer that the GUI requires to run. Please try following the instructions in this guide: https://docs.microsoft.com/en-us/dotnet/framework/install/dotnet-35-windows-10. Once you have done so, retry launching the GUI.

Best Regards,

Justin Beigel

0 Christian Shimp over 1 year ago in reply to Justin Beigel

Prodigy 10 points

Thank you!

0 Justin Beigel over 1 year ago in reply to Christian Shimp

TI__Genius 17660 points

No problem. Glad your issue is resolved.

Best Regards,

Justin Beigel

Sensors

Sensors forum

LDC1101EVM: Issues getting the EVM GUI working.