This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV5053-Q1: Magnetic Sensing Proximity Tool (Rev. F)

Part Number: DRV5053-Q1

I am having some trouble with the "Magnetic Sensing Proximity Tool (Rev. F) "
when I try to enter into the Excel
microsoft excell tells me "the cell or chart you are tryign to chagne is on a protected sheet. to make a change, unprotect the sheet"
When I go to unprotect the sheet, it asks for a password
I'm just trying to use the tool from the TI website


https://www.ti.com/lit/zip/slyr071

I found it on this product page: https://www.ti.com/product/DRV5053

  • Chad,

    Thanks for reaching out on E2E.  This tool does have the VBA code locked, but you shouldn't need to unlock the workbook in order to enter your parameters.  The tools steps you through the required information that should be supplied in the teal colored cells

    The red arrow indicates what information the tool is ready to accept. Since the VBA must parse through all of this data to configure how some of the cells are used, it requires that you provide the requested information following the indicator to prevent an incomplete setup.

    Thanks,

    Scott