This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR2243BOOST: Questions about the Device(AWR2243Boost&DCA1000evm)

Part Number: AWR2243BOOST
Other Parts Discussed in Thread: AWR1843BOOST, DCA1000EVM, , AWR2243, AWR1843

Hi,

I already use AWR1843boost & DCA1000evm. So I know the product operation system.

But I am new at AWR2243Boost and will buy it later. So I have a question about AWR2243Boost with DCA1000EVM.

Question 1. Could AWR2243Boost with DCA1000evm get raw data(I/Q signal)?

Question 2. I saw a chart(Device Comparison) at datasheeet. there are no DSP and MCU at AWR2243.

                   So I want to know what dose DSP and MCU meaning for the radar?

Thank you.

  • Hello Hyokbeen Lee,

    1) Yes you can get the raw adc data with the AWR2243 Boost and the DCA1000

    2) So in the AWR1843 as there is a MCU and DSP, you can write custom applications and the raw ADC data can be processed by the DSP on the chip itself.
    But in the AWR2243 is mainly used for streaming the Raw ADC data over the LVDS/CSI2 lanes over to the DCA1000EVM, which is then transported the ethernet over to the pc and then you can utilize the postproc present in the studio for more analysis. You cannot write your applications or process data on the AWR2243 chip.

    Regards,
    Saswat Kumar