IWR6843ISK: Obtain both UART data of IWR6843ISK and RAW data of DCA1000EVM, simultaneously.

Jarry long

Part Number: IWR6843ISK
Other Parts Discussed in Thread: DCA1000EVM,

Hi, Ti

I can obtain the UART data of iwr6843ISK and the ADC raw data of DCA1000EVM, respectively. However, when I want to obtain UART data of IWR6843ISK and ADC RAW data of DCA1000EVM at the same time, I don't know how to do it. Can you provide relevant information or explanation? Looking forward to your answers!

Thank you very much!

over 1 year ago

+1 Pedrhom Nafisi over 1 year ago

TI__Genius 12436 points

Hello,

It is not possible to output both raw ADC data and post processed UART data simultaneously. Too much data would need to be outputted at once and the sensor would not be able to handle it. Your best bet is to record a session using DCA1000 of a set environment, change nothing than taking a UART recording. This way you can create your own raw data processing algorithms of your and have something to compare it to.

Best Regards,

Pedrhom Nafisi

0 Jarry long over 1 year ago in reply to Pedrhom Nafisi

Prodigy 20 points

Thank you for your reply!

Sensors

Sensors forum

IWR6843ISK: Obtain both UART data of IWR6843ISK and RAW data of DCA1000EVM, simultaneously.