This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843ISK: IWR6843ISK

Part Number: IWR6843ISK

Does the current version of IWR6843ISK evaluation kit include CAN transceivers?

https://www.digikey.co.za/en/products/detail/texas-instruments/IWR6843ISK/10434492

Furthermore, what is required to configure it to route measurements over CAN bus?

  • Hi,

    Yes they do include a CAN transceiver. Information on the EVM's can be found on the 60GHz mmWave Sensor EVM's User Guide.

    In order to route signals via CAN, you will need to modify the device software to do pinmuxing and to leverage the CAN driver. For reference on how to do this, you can look at either the CAN driver test code located in the mmWave SDK, or you can look at the demo Object data over CAN in the mmWave Automotive Toolbox.

    Best Regards,
    Alec