• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 211 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LDCCOILEVM: Application Inquiry

Renan Santos Adriano
Mastermind 20410 points
Part Number: LDCCOILEVM
Other Parts Discussed in Thread: LDC0851EVM

Hello Team,

Posting on behalf of my customer:

Due to space limitations, Are there any premade stacked coils that come in various sizes?

Is there any way to use LDCCOILEVM for a stacked coil design?

Regards,

Renan

  • 0
    TI__Mastermind 18545 points

    Hello Renan, 

    The LDC0851EVM comes with a stacked coil design on it's board. 

    If you have two of the LDCCOILEVMs, you can create a stacked coil by putting two identical coils on top of each other with a separation layer in between. This won't be the same as implementing it on a single PCB since the thickness won't be the same but it is a good way to do a quick prototype or proof of concept test. 

    Best Regards, 

    Justin Beigel