MMWCAS-DSP-EVM: ReadRegister failed with error -8

Tried both the meta image and radarss image for various versions of the DFP.

I am not sure whether the firmware has been loaded correctly or not, though no errors were thrown when clicking 'Load'

Not sure if this is correct, found it in the mmWave Radar Interface Control document

In the output, I do not get a Status message after the firmware is loaded (e.g. Status: passed). Only these functions are called:

[09:01:59] [RadarAPI]: ar1.DownloadBSSFw_mult(1,"C:\\ti\\mmwave_dfp_02_02_04_00\\firmware\\xwr22xx_metaImage.bin")
[09:01:59] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(1, C:\\ti\\mmwave_dfp_02_02_04_00\\firmware\\xwr22xx_metaImage.bin)

I see that with latest version of mmWave Studio, you are able to resolve this issue.

Let us know over different e2e thread if you face any other problem in future.

Regards,

Jitendra

In my message, I state that version 3.0.0.14 resolved the issue, not the latest version.