AWR1843: AWR1843 EVM Init Calibration Status = 0xdfe

Logen SHI

Part Number: AWR1843

I'm trying to use mmwave_sdk_03_05_00_04 version of interference mitigation project, AWR1843BOOST EVM
Received the following response in the visualizer,

Please refer to the following closed forum thread for background information:

e2e.ti.com/.../awr1843-error-while-flashing-config 25253D%2525200xDFE#

Thanks! -Logan

5 months ago

0 Pradipta Bandyopadhyay 5 months ago

TI__Mastermind 18305 points

Hi,

We will need to check this once in the team internally. We will get back by next week.

Thanks,

Pradipta.

0 Logen SHI 5 months ago in reply to Pradipta Bandyopadhyay

Prodigy 30 points

HI Pradipta,

waiting for your solution.

Regards,

Logen

0 Saswat Kumar 5 months ago in reply to Logen SHI

TI__Genius 16715 points

Hello Logen,

Have you modified any code?
Can you flash the prebuilt binary along with the project and try without rebuilding it first.

Regards,
Saswat Kumar

0 Logen SHI 5 months ago in reply to Saswat Kumar

Prodigy 30 points

HI Saswat Kumar,

I have not modified the code.

I use the xwr18xx_intf_demo.bin provided by interference_mitigation for flash.

Regards,

Logen

0 Saswat Kumar 5 months ago in reply to Logen SHI

TI__Genius 16715 points

Hello Logen,

Have you tried the oob demo part of the AWR1843 once to verify the board is functional?

Regards,
Saswat Kumar

0 Logen SHI 5 months ago in reply to Saswat Kumar

Prodigy 30 points

HI Saswat Kumar,

Is there any example reference for how to do oob demo?

Regards,

Logen

0 Saswat Kumar 5 months ago in reply to Logen SHI

TI__Genius 16715 points

Hello Logen,

You can download the mmwave SDK 3.6, in that the demo has a user guide which you can follow.

Regards,
Saswat Kumar

0 Logen SHI 5 months ago in reply to Saswat Kumar

Prodigy 30 points

HI Saswat Kumar,

I will try again, thanks!

Regards,

Logen

Sensors

Sensors forum

AWR1843: AWR1843 EVM Init Calibration Status = 0xdfe