• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 305 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMCS1123: Does TMCS1126 have "OCP Hold Time"?

Guohai Lin
Intellectual 2451 points
Part Number: TMCS1123

Hi team,

1.Does TMCS1123/1126 have "OCP Hold Time"?   The minimum time OCP flag will be asserted after a sufficient OCP

event. (Like tHOLD in the  ACS37002);

2.What time does "Current Overload Recovery Time" refer to? Is it the time from circuit overcurrent to circuit recovery?

 Thanks！

 

Best Regards,

Guohai Lin 

  • 0
    TI__Mastermind 20915 points

    Hello Guohai,

    Thank you for using the TI forum. Here are my responses to your questions:

    1. No, there is no hold time for the over current alert.
    2. The “Current Overload Recovery Time” is the time it takes for the output to be valid after the device output has been saturated from overcurrent.

    Regards,

    Mitch