This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1843AOPEVM: Pins in AWR1843AOPEVM are not matching with the pins initialized in MRR Lab and MMWAVE SDK

Part Number: AWR1843AOPEVM
Other Parts Discussed in Thread: AWR1843AOP

Hello,

While referring to the AWR1843AOPEVM, I found out that the pins used for different interfaces; GPIO, I2C, UART, SPI, etc don't match the ones in the MRR Lab and MMWAVE SDK.

Can you help me understand how these interfaces are being to the right pins on schematic? 

Attaching an example for reference:

UART discrepancy, Pin F14 is being used in the lab but AR_MSS_LOGGER is connected to E2:

Thanks,

Nishil