This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPT3004: How to connect ADDR to SCL or SDA?

Part Number: OPT3004

Dear Sir/Madam, 

I need to connect four OPT3004 in one I2C bus. Based on the table 8-1 on the datasheet, the I2C can be configured in four different ways, connecting to VDD/GND/SCL/SDA.

My question is, how should I connect ADDR to SCL or SDA? Should I use a series 10K resistance or short them directly?