This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443BOOST: How to synchronize IWR1443BOOST and IWR1642BOOST?

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1642BOOST, AWR1443

Hi,

I would like to know how to synchronize  IWR1443BOOST and IWR1642BOOST boards. I have gone through the below link on how to synchronize two AWR1443 boost boards. It is related to two similar board.Is there any difference when using two different boards?

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/919375/awr1443boost-realization-of-spi-control-using-two-awr1443boost

Thank you,

Vandana

  • Hi Vandana, 

    The same general process can be followed but you should double check the schematic for the boards that you are specifically using and ensure that the pins/signals used correlate with what is referred in the linked post. The linked post also mentions required board modifications. You need to confirm on the schematic for you board if the same modifications are required or not. 

    Best Regards,

    Josh

  • Thank you for the information