This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443BOOST: IWR1443BOOST no reply the detect data

Part Number: IWR1443BOOST

Dear Sir

I would like to ask you the following questions regarding IWR1443BOOST.

I confirmed the detection operation of IWR1443BOOST using mmWavw Demo Visualizer. After that,

I sent the Configuration (.cfg) File (from sensorStop to sensorStart) to IWR1443BOSST from my PC using my own program in Python or CLI Tera term, but there was no reply.

(Sent configuration file and waits for reception. During this time, not a single character is returned.)

Please let me know what I need to do to enable communication. I've read the manual over and over again and understand most of it, but I can't get to the next step. Thank you for your understanding.


The firmware of IWR1443BOOST remains as it was when shipped from the factory.

The COM port is as displayed in the PC's device manager.

The baud rate for "Transmit": Application/User Port is 115200, "Receive": Auxiliary Data port is 921600. Each line of the Cofiguartion file is converted to binary format and sent.


Thank you.