• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 211 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RE: OPT3101: OPT3101 photodiode selection

Pengsheng Qiu
Intellectual 330 points
Other Parts Discussed in Thread: OPT3101

Gordon:

    OPT3101 SDK  Performing Internal Cross talk Measurement,I am looking for a text in OPT3101 SDK Users Guide.pdf

The next picture Which parameter of serial port print determines that the internal crosstalk of the hardware design meets the requirements：

  Best raw crosstalk?

    Thanks;

  • 0
    TI__Genius 9380 points

    Pengsheng,

      I split this question from the original question. If the first question was answered, please select this answered my question and create a new question. Creating a new question helps others to track each specific question and answer. Thank you.

    If there were no crosstalk at all it would be best. As close to zero the better for noise. Since this is not possible in a practical design, the crosstslk should be as low as possible. <200 is a great crosstalk number.