• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 206 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LDC-HALL-HMI-EVM: reading of the axes of the TMAG5273 on the LDC-HALL-HMI-EVM

Marc-Antoine Sauve
Prodigy 10 points
Part Number: LDC-HALL-HMI-EVM
Other Parts Discussed in Thread: TMAG5273, TMAG5273EVM

Tool/software:

Hi,
We have a LDC-HALL-HMI-EVM, but we would like to be able to read the axes of the TMAG5273 chip on the board like the TMAG5273EVM_GUI. Is there a possibility to acces it? 
Best regards,

---

Marc-Antoine Sauvé

Stagiaire R&D, département HMI

 

Les Industries BRP Mégatech inc.

90, 28e rue, Shawinigan, QC G9T 5K7

  • +1
    TI__Mastermind 18545 points

    Hello, 

    The SCB is the main controller for the LDC-HALL-HMI-EVM and the TMAG5273EVM. To get the TMAG5273 on the LDC-HALL-HMI-EVM to communicate to the GUI, all you need to do is reflash the SCB firmware to the TMAGx273EVM_GUI firmware. This can be done by going to the TMAG5x73EVM_GUI and clicking File->Program device with the SCB connected to the computer. 

    Best Regards, 

    Justin Beigel