• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 31 subscribers
  • Views 244 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMCS1126: Error in TMCS-A-Adapter Evaluation Module assembly instructions

Keith Barkley
Guru 42035 points
Part Number: TMCS1126

Tool/software:

In the instructions (SBAU452) it says:

But in the data sheet:

In the DS, GND is pin 9 and Vs pin 4, not 8 and 3 as shown in the user guide.

I am going to assume that the data sheet is correct!