• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 105 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BOOSTXL-TUSS4470: Getting stared with : TUSS44x0 EVM

Mahesh Gaikwad
Prodigy 30 points
Part Number: BOOSTXL-TUSS4470
Other Parts Discussed in Thread: ENERGIA

Tool/software:

Connected BOOSTXL-TUSS4470 as indicated in user guide (slau822a.pdf). I also verified jumpers J6 (Short 3-4 & 5-6) and J8 (1-2 & 3-4)

Have downloaded GUI and on GUI i keep getting VDRV Rdy as 0 (Redbackground)

I am using USB only connect and have no extra power connection done (Please find attached image for ref)

I would also like to try this with a simple C application (Have CCS installed) and would like to know if there is any application code to do this.

Thanks

-maheshG

  • 0 in reply to Mahesh Gaikwad
    TI__Mastermind 21430 points

    Hello Mahesh,

    Thanks for posting to the sensors forum!

    1. i keep getting VDRV Rdy as 0 (Redbackground)
      1. Please change the VDR_HI_Z register setting to Not Hi Z and this should clear the VDR Rdy issue you are seeing. You will have to do this every time at startup as the device defaults to the Hi Z setting.
    2. I would also like to try this with a simple C application (Have CCS installed) and would like to know if there is any application code to do this.
      1. We have energia example that can be downloaded here, I believe from there you can export the Energia example into CCS code in C.

    I hope this helps let me know if there are any other questions I can help out with!

    Best,

    Isaac