IWRL6432AOP: Radar based mapping

Hello,

What kind of Radar-based mapping are you looking for? SLAM as an example? Please take a look at our Radar Toolbox where we have demo code and videos that show what can be done with our mmWave devices. Everything seen is done on chip (except for visualizing).

Example:

https://dev.ti.com/tirex/explore/node?a=1AslXXD__2.20.00.05&node=A__AOWrkwbTC6SqhjS8xzVlrg__radar_toolbox__1AslXXD__2.20.00.05

There is no performance difference between any AWR and IWR, they are different for regulation purposes as AWR is for automotive and needs to be qualified to a higher standard.

Best Regards,

Pedrhom

Hello,
Thank you for your response and the link.

We are looking to map out an underground area that is dimly lit/no light. Will this be possible with the xWRL6432AOP as we need to use the lower power sensors in some of our devices.
From the link you sent it appears that the area mapping is done by the IWR6843(AOP) is this correct?

Is it possible to set up a meeting to discuss what I am looking for from your chips?

Kind regards,

Keri-Lee

Hello Keri-Lee,

I have requested for a TI Representative to reach out to you. We will get in touch soon.

Best Regards,

Pedrhom