MMWCAS-RF-EVM: Beamforming using MMW CAS DSP EVM and MMW CAS RF EVM

senal Perera

Part Number: MMWCAS-RF-EVM

Tool/software:

i want configure the board for Beamforming. for that i am using following part in the mmwave cascade user guide( section 8.3.3) . but when i am doing that there is following error in the matlab. can you explain reason ? and explain how to fix this ? or what are other ways for the beamforming data capturing ?

over 1 year ago

0 Samhitha Bobba over 1 year ago

TI__Mastermind 22600 points

Hi Senal,

Check the version of Studio that you have and provide the right path to RSTD_DLL_Path. Also try removing 'file:///' from the given path.

Regards,

Samhitha

0 senal Perera over 1 year ago in reply to Samhitha Bobba

Intellectual 260 points

we are trying using three lua scripts as mention in the user guide. but in the second lua script ( Cascade_Configuration_TXBF.lua) we want to capture the data in the beamforming mode. how can we change the beam steering angle and any other feature using these scripts ?

Samhitha Bobba said:
Also try removing 'file:///' fr

0 Samhitha Bobba over 1 year ago in reply to senal Perera

TI__Mastermind 22600 points

Hi Senal,

You can refer to the following document to understand about Tx Beamforming - Beamforming In Lrpd (ti.com).

Regards,

Samhitha

Sensors

Sensors forum

MMWCAS-RF-EVM: Beamforming using MMW CAS DSP EVM and MMW CAS RF EVM