This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWRL6432: issue on flashing the application

Part Number: AWRL6432
Other Parts Discussed in Thread: MMWAVE-L-SDK, UNIFLASH, IWRL6432AOP, , AWR6843, , AWR6843AOP

Tool/software:

Hi there, 

I am using the ARWL6432AOP (XA6432BRBAAMYQ1) custom board.

The problem is when I try to flash the application using commands, it is not working, even if I followed  how to flash in README_FIRST_xWRL6432 file from xWRL6432 MMWAVE-L-SDK  05.05.00.02.  

I have the below log and got it stuck even though I set the SOP to flash mode.  

C:\ti\MMWAVE_L_SDK_05_05_00_02\tools\boot>python arprog_cmdline.py -p COM7 -f ../../examples/hello_world_cpp/xwrL64xx-aop/m4fss0-0_freertos/ti-arm-clang/hello_world_cpp.release.appimage -s SFLASH -t
META_IMAGE1
Connecting Com Port....
connect to device
INFO : Port Opened
set break signal
--- please restart the device ---
Flashing through the Uniflash does not work either.
What I have checked out so far is CCS is working and UART is OK as well.

Writing to the flash has no issue in CCS debug mode.

Could you let me have any hints for this trouble?

Thanks.