AWR2944EVM: An error in loading the same configuration file based on two OOB FW

Tool/software:

Hi,

when I load FW as written in SDK from:

mmwave_mcuplus_sdk_<ver>\mmwave_mcuplus_sdk_<ver>\ti\demo\awr2944\mmw\awr2944_mmw_demoDDM.appimag

The local python visualizer (radar_toolbox_3_10_00_05\tools\visualizers\Automotive_Visualiser) works,

but if I load appimag from the Radar Toolbox:

radar_toolbox_3_10_00_05\source\ti\examples\Out_Of_Box_Demo\prebuilt_binaries\out_of_box_2944.appimage

the loading of a configuration is stacked (usually on CFAR configuration).

As I wrote before, I use the latest SDK mmwave_mcuplus_sdk_04_07_00_01, so the SBL I still take from the same location:

- SBL (mmwave_mcuplus_sdk_<ver>\mmwave_mcuplus_sdk_<ver>\tools\awr2944\sbl_qspi.release.tiimage).

So, the question: what is wrong?

The configuration that I load is:

sensorStop
flushCfg
dfeDataOutputMode 1
channelCfg 15 15 0
adcCfg 2 0
adcbufCfg -1 1 1 0 1
lowPower 0 0
profileCfg 0 77 10 10 130 0 0 2.5 1 384 4000 0 0 30
chirpCfg 0 5 0 0 0 0 0 15
frameCfg 0 5 64 0 384 100 1 0
lowPower 0 0
guiMonitor -1 2 0 0 0 0 0
antGeometryCfg 1 0 1 1 1 2 1 3 0 2 0 3 0 4 0 5 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 0.5 0.8
cfarCfg -1 0 3 16 0 0 1 15 0 7 0 1
cfarCfg -1 1 3 16 0 0 1 15 0 7 0 1
compressionCfg -1 1 0 0.5 8
intfMitigCfg -1 15 18
localMaxCfg -1 6 40
ddmPhaseShiftAntOrder 0 2 3 1
antennaCalibParams 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
measureRangeBiasAndRxChanPhase 0 1.5 0.2
aoaFovCfg -1 -90 90 -90 90
calibData 0 0 0
sensorStart