TMP006 – About slave address setting (Table1)

Hide

Guru 21045 points

Hi,

We would like to ask about slave address setting (Table1).

I believe that I have to connect the following condition,

If I would like to set the slave address to "1000010 (or 1000011)".

- ADR0 pin to SDA pin (or SCL pin )

- ADR1 pin to GND.

Is my understanding correct?

Regards,

Kanemaru

0 Abhishek Muppiri over 11 years ago

Hello Kanemaru-San,

Sorry for my delayed response.

Yes, you are absolutely correct with the connections and I2C slave address settings.

1000010(ADR0 -SDA, ADR1=GND)

1000011((ADR0 -SCL, ADR1=GND)

Thanks for checking with us.

Best Regards,

Abhi

0 Hide over 11 years ago in reply to Abhishek Muppiri

Guru 21045 points

Hi Abhi-san,

Thank you for the information.

Ｉ understood. thank you very much.

Regards,

Kanemaru

Sensors forum