LDC1312EVM: LDC1312_fmwr - update Error

CMICO SHU

Part Number: LDC1312EVM
Other Parts Discussed in Thread: LDC1312,

Hi ~ Ti team

I had installed " ldc1312 driver" from C:\ti\Sensing Solutions EVM GUI-1.9.2\EVM Driver to Ldc1312-evm , and it had been working .

when I update "LDC1312_fmwr_07.txt" that is downloaded form TI.com (SNOC022-LDC1312EVM Firmware) to ldc1312-EVM ,

and the PC can't detect the LDC1312EVM , only show "HID-compliant device"

How can let it work ?

Thanks

over 6 years ago

0 Luke LaPointe over 6 years ago

TI__Genius 13335 points

Hello,

We recommend to use the firmware that is located in the Sensing Solutions folder. If the EVM is in BSL mode then you can use the GUI to upload the firmware even though it says "not connected" at the bottom. If the device is not already in BSL mode, then you can follow the instructions from Question 36 of the FAQ: e2e.ti.com/.../295036

Note that another user just had a similar question: e2e.ti.com/.../632895

Regards,

Luke

0 CMICO SHU over 6 years ago in reply to Luke LaPointe

Prodigy 30 points

Hi Luke ,

Thanks for your suggestion, I connect the PUR to VUSB PIN , but It is not connecting to PC.

The EVM is still not working.

VID: 0x2047 • PID: 0x0200 ,

0 CMICO SHU over 6 years ago in reply to CMICO SHU

Prodigy 30 points

Hi Luke ,

THE EVM is working now.

After Connecting the PUR to VUSB PIN,
then USB VID= 0x2047 PID= 0x0200 , and use "MSP430 USB Firmware Upgrade Example" update the firmware "C:\ti\Sensing Solutions EVM GUI-1.9.2\EVM Firmware\Older Revs \FDC2x14_LDC13xxRevB_LDC16xxRevB_EVM_Firmware.txt"

thanks

Sensors

Sensors forum

LDC1312EVM: LDC1312_fmwr - update Error