• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 645 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPT8241-CDK-EVM: My camera can not do streaming in Voxel Viewer 0.7.0 although the LEDs are green and blue

VInh Nguyen
Prodigy 40 points

Part Number: OPT8241-CDK-EVM

Hi,

The LEDs on my board is green and blue, but when start streaming in Voxel Viewer, the error log file is:

("ERROR: USBIO: Control transfer issue")

("ERROR: VoxelUSBProgrammer:Could not read register for address 0x5c65")  ("ERROR: VoxelProgrammerBase:Could not read register for address 0x5c65") 

("ERROR: VoxelUSBProgrammer:Could not read register for address 0x5c66")  ("ERROR: VoxelProgrammerBase:Could not read register for address 0x5c66")

 ("ERROR: VoxelUSBProgrammer:Could not read register for address 0x5c61")  ("ERROR: VoxelProgrammerBase:Could not read register for address 0x5c61")

 ("ERROR: VoxelUSBProgrammer:Could not read register for address 0x4e04")  ("ERROR: VoxelProgrammerBase:Could not read register for address 0x4e04")

 ("ERROR: VoxelUSBProgrammer:Could not read register for address 0x4b04") ("ERROR: VoxelProgrammerBase:Could not read register for address 0x4b04")

Everytime i change the parameters on the right panel, an error panel appears. For instance, if i change frame rate, it says "Could not set the frame rate to ...".

Please tell me how i can fix my device.

Yours sincerely

Vinh Nguyen