AWR1642: Debug errors

Hi,

This type of error happens because the processing performed during the inter-frame idle time goes beyond the duration of the idle time.

You should benchmark your processing time and check how it compares to the frame idle time.

In the mmWave SDK demo the MSS gives control back to the DSS only after the UART transmission has completed.

You can disable that by commenting out:


// DebugP_assert(gMmwDssMCB.dataPathObj.interFrameProcToken == 0);
gMmwDssMCB.dataPathObj.interFrameProcToken++;

Thank you
Cesar