The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMP116EVM: about the GUI for TMP116

Part Number: TMP116EVM

Hi team,

TMP116EVM GUI doesn't start correctly. I tries on two Windows10 PC and two set of TMP116EVM. When I unchecked Demo Mode checkbox, always popup saying " Interface not initialized". GUI installation with NI run-time should be correct.

Could you please advice how to correctly set up TMP116EVM?

Also TMP116EVM Orage LED is alway's on. Is this working good?

Appreciate your support.


  • Hi user,

    The message indicated that your computer wasn't recognized the EVM. When you first plugged the TMP116EVM into your computer, did you see a Windows popup message at the bottom right corner with "Device driver is installed sucessfully"? You can also check by going into the device manager as shown in the red rectangular box. Or you can also try different USB port.

    Hope this helps. Let me know if you have further questions.


  • Hi Yoshihiko-san,

    I want to check back with you if you were able to resolve the issue based on my inputs. Please let me know if you still need my help.