Hi champion,
My customer runs the vital signal demo on AWR1642 EVM. The demo is in mmwave_automotive_toolbox_1_2_0. When started the GUI, there is not output in the screen. It is like below:
I tired it on my EVM, there is no problem. I double checked the image and GUI location in customer' side, and found no problem.
-
C:\TI\mmwave_automotive_toolbox_1_2_0\labs\lab0001-driver-vital-signs\vitalSigns_target\pre-built-Binaries\ xwr16xx_vitalSignsDemo_lab.bin
-
C:\TI\mmwave_automotive_toolbox_1_2_0\labs\lab0001-driver-vital-signs\vitalSigns_host\gui\gui_exe\VitalSignsRadar_Demo.exe
The console window output is in attched document.
demo板打印信息.docx
Their computer's configuration is in below figure.
Coud you help to check? what may be the cause?
Thanks,
Adam