Other Parts Discussed in Thread: UNIFLASH, IWR1443
I have exactly the same issue where mmwave Demo Visualizer does not appear to be working at all. The followings are the steps I took
1. set SOP jumpers to 101
2. re-flashed the DUT with xwr14xx_mmw_demo_mss.bin using uniflash
3. remove SOP2 jumper
4. power cycle DUT
5. start mmwave Visualizer, set comPort accordingly and plaform= xWR14xx; SDK version=1.2; Antenna Config=4Rx,2Tx
6. "COM3:115200, COM4:921600 waiting for data ." message shown at the bottom of the screen; so I pressed NRST button on the DUT. message changed to "COM3:115200, COM4:921600 Hardware Connected."
7. pressed "send config to mmwave"; nothing shown on the console box
6. went to plots, select load config from pc and send; still nothing happended
The IWR1443 LED DS3 remainedoff all the time.
