AWR1642BOOST: mmWave Sensing Estimator

Rahul Kumar85

Part Number: AWR1642BOOST

hi,

As the mmwave Sensing Estimator is producing .json file. Is there a way to convert all these parameters or this file into a config file and upload it on the EVM?

Or any other to way to make radar work according to this configuration?

Regards

over 7 years ago

0 Kyle Cousino over 7 years ago

TI__Mastermind 24955 points

Rahul,

You can open the .json file using a basic text editor like Notepad++. You can have to extract the values and determine where they correspond in a configuration file (.cfg). You can use the SDK User's Guide to map the values from the Sensing Estimator Tool to the CLI commands in the configuration file.

Regards,
Kyle

0 Rahul Kumar85 over 7 years ago in reply to Kyle Cousino

Intellectual 890 points

Thanks Kyle, I'll try to explore it. If you find any reference document please attach.

Regards,
Rahul

Sensors

Sensors forum

AWR1642BOOST: mmWave Sensing Estimator