AWR1642BOOST: How to parse AWR1642 data through Ethernet connection?

JinHyeong Kim

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: DCA1000EVM, AWR1642

Hi,

When using UART connection, i used parse code that is slightly modified from Zone occupancy lab code.

If i use Ethernet communication using DCA1000EVM, is there any demo code which explain how to parse output of AWR1642 demo file via Ethernet connection?

Thanks

Jinhyeong Kim

over 6 years ago

0 Jitendra Gupta over 6 years ago

TI__Guru 69960 points

Currently DCA1000EVM is used only to send raw adc data over LVDS interface to PC. Officially there is no tool\script avaialble to parse object data captured over LVDS using DCA1000EVM.
Here is the document which explains about the capture data format for ADC raw data.
www.ti.com/.../swra581b.pdf

Regards,
Jitendra

0 JinHyeong Kim over 6 years ago in reply to Jitendra Gupta

Intellectual 460 points

As I saw before, i remember that there is a function to dca1000evm to send user data. It is not true?

0 Cesar over 6 years ago in reply to JinHyeong Kim

TI__Guru*** 147994 points

Hi,

Today, it is not possible to send user data with DCA1000

This feature should be supported in future releases of the the SDK

thank you
Cesar

0 JinHyeong Kim over 6 years ago in reply to Cesar

Intellectual 460 points

Hi,
In thread 'CCS/DCA1000EVM: Can I output the data after Range FFT / Doppler FFT / Azimuth FFT instead of the raw data after adc sampling?'

There is an answer that it is possible to send user data through LVDS and DCA1000EVM.

So what is true?

Thank you
Jinhyeong

0 Jitendra Gupta over 6 years ago in reply to JinHyeong Kim

TI__Guru 69960 points

Hi,
Sorry for the confusion here, you can send user data through LVDS in AWR1642 with DCA1000EVM.
Follow these threads
e2e.ti.com/.../2803488
e2e.ti.com/.../759979

Regards,
Jitendra

Sensors

Sensors forum

AWR1642BOOST: How to parse AWR1642 data through Ethernet connection?