HDC2010EVM: Firmware source code

Franz Figueroa32

Part Number: HDC2010EVM
Other Parts Discussed in Thread: HDC2010, MSP430F5529

Hi E2E,

Good day!

Do we have the source code of HDC2010EVM? It seems that the source code on the EVM firmware folder included in the GUI is not compatible with HDC2010. Is that correct? https://e2e.ti.com/support/sensors/f/1023/t/631525

Looking forward to your answer.

Best regards,

Franz

over 5 years ago

0 Josh Wyatt over 5 years ago

TI__Guru* 91166 points

Dear Franz -
that post was discussing differences between HDC10xx and HDC20xx at the end.
The firmware which is provided with the Sensing Solutions GUI is for the MSP430F5529, and is compiled code, which is performing the I2C to USB conversion. All the commands, etc. are coming from the GUI, over USB to I2C link. This EVM is not a firmware development platform, as shipped.

If you want firmware development platform for the HDC2010, would here direct you to a couple links from which you can choose from a variety of MCUs and MCUs with radios, that share a common core codebase, called SimpleLink and use one of the hardware platforms with associated SDK and with the Sensors and Actuator Plugin:
www.ti.com/.../SIMPLELINK-SDK-SENSOR-ACTUATOR-PLUGIN
and
dev.ti.com/.../node

You would pick your MCU plaform, get the hardware bundle from here:
LaunchPad: (choose from list you find above that meets your requirements - from MSP432, CC13xx, CC26xx, CC32xx)
BoosterPack: www.ti.com/.../

0 Franz Figueroa32 over 5 years ago in reply to Josh Wyatt

TI__Intellectual 2660 points

Hi Josh,

Thank you for your response.

Actually, my customer is looking for the software that he can use to reflash his EVM. Do we have that?

Best regards,

Franz

0 Josh Wyatt over 5 years ago in reply to Franz Figueroa32

TI__Guru* 91166 points

Dear Franz -

that would be the firmware (txt file) found in C:\ti\Sensing Solutions EVM GUI-1.10.0\EVM Firmware\HDC20x0 folder. FIle name is: EVM_HDC20X0.txt

Instructions on how to use this file to update the EVM are here (starts page 39)

http://www.ti.com/lit/ug/snau214/snau214.pdf

0 Franz Figueroa32 over 5 years ago in reply to Josh Wyatt

TI__Intellectual 2660 points

Hi Josh,

Thank you for giving this information.

Best regards,
Franz

Sensors

Sensors forum

HDC2010EVM: Firmware source code