This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV5015-Q1: Reference circuit schematic for DRV5015-Q1

Part Number: DRV5015-Q1
Other Parts Discussed in Thread: DRV5015

Hello sensing team,

Our customer is now will just start evaluating DRV5015A1EDBZRQ1.

They are not sure how to choose the value of external component. The DRV5015-Q1 datasheet recommend input bypass capacitor at least 0.01uF for VCC pin.

Q. Do you have any recommendation parameter of the ESR of the bypass capacitor? or Do you have any actual P.N of the capacitor?

Q. Is there any other external component to recommend for other portion?

Thanks,

Yuta Kurimoto

  • Hello Kurimoto-san,

    We do not have a specific recommendation for ESR, but in general the lower the better.  We also don't recommend any specific part number for a capacitor, but we do recommend that the capacitor is placed physically close to the device. 

    The DRV5015 is open-drain, so you will also need a pull-up resistor on the output.