Questions about implementing mmWave Studio automation

Annie Liu

Hi Team,

Customer has below two questions need help.

1. In the manual, there is a section on using MATLAB and mmWave Studio, but it only shows two basic functions. There is very little content on how to use MATLAB to send API instructions to studio. Could you provide more detailed content, such as an example?

2. There is a LUA compiled script in DFP, but there is no introduction to the whole project in the folder. Could you provide detailed information about scripts such as AR1xlint.lua?

Thanks.

over 6 years ago

0 Chloe Shay71 over 6 years ago

TI__Expert 4025 points

Hello,

Please see sections 4 and 5 of the mmWave Studio User Guide for help with Lua scripting.

-Chloe

0 Annie Liu over 6 years ago in reply to Chloe Shay71

TI__Genius 10295 points

Hi Chloe,

Thanks for your answer.

The LUA script contains two types of scripts, RTSD and ar1. The ar1 script can be mutually verified with the radar function API. So where can the description of the RSTD script be found? Can you provide documentation on RSTD?

0 Chloe Shay71 over 6 years ago in reply to Annie Liu

TI__Expert 4025 points

Hi Annie,

Please read the post (Oct 14) in this thread that gives an example Matlab script and for examples on how to use the RTSD function.

https://e2e.ti.com/support/sensors/f/1023/t/735202

Also, please look at this post for help on how to use RSTD functions.

https://e2e.ti.com/support/sensors/f/1023/t/718879?tisearch=e2e-quicksearch&keymatch=rstd

-Chloe

Sensors

Sensors forum

Questions about implementing mmWave Studio automation