Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LDC2114: About the value of OUT of LDC2114

Part Number: LDC2114

Hi Sir,

May I check with you that the data streaming (Data Codes) of GUI's graph is come from the OUT DATA(Resister 0x02-0x09)?

if not, how to get the Data Codes?

thanks~

Regards,

Drisoll

  • Hello Driscoll,

    Yes, the data stream tab of the GUI shows the data from the DATAx registers. You can also look at the DATAx registers in the Register tab of the GUI. If you would like to use your own MCU or other I2C interface, you can read the DATAx registers over I2C. 

    Please note that the STATUS register is also graphed on the data streaming tab of the GUI.

    Best Regards,